Click here to Enlarge
Kodak KLIC-5001 battery

Kodak KLIC-5001 Compatible with the Following Battery Code :

APS : BC1072

DELKIN : DD/K5001, DD/KLIC5001

KODAK : DKD002, KLIC-5001

ULTRALAST : ULKLIC5001

VIDPRO : ACD237


Kodak KLIC-5001 Fits for the Following Model :

KODAK : EASYSHARE DX6490, EASYSHARE DX7440, EASYSHARE DX7590, EASYSHARE DX7630, EasyShare P850, EasyShare P880, EasyShare Z730, EasyShare Z7590, EasyShare Z760

All of us want to prolong our Kodak KLIC-5001 Digital Camera battery's life. But without question every battery has a natural course of aging. After used for a long time, the battery get weak. This is cannot be eliminated, but we can prolong this aging course by using suitable method.

Store :
1): Store it in a cool and dry place (The suitable temperature is about 15°C).
2): Before storage, you should confirm your Kodak KLIC-5001 is not fully depleted. If empty, charge for about 30 minutes .
3): Usually a lithium-ion battery should be stored at about 40% state-of-charge, because laptop battery's self discharge can break the battery in the storage .
4): Use soft and dry cloth to clean your KLIC-5001 battery after using it.
5): Please take out the Kodak KLIC-5001 battery from your machine when it is not being used.

Charge :
1):When you prepare to charge for your Kodak KLIC-5001 battery ,make sure the temperature is around the room temperature.
2): Most battery can be fully charged in about 3 hours so do not leave a battery in a charger for a long time.
3): Do not charged to higher voltages than its threshold voltage ,as it would become unsafe. Especially need to pay attention is avoid over-charging and over-discharging.
4): Please notice this: It is not very distinct to reduce the charge time by increasing the charge current .

See more battery tips at Battery Tips and Battery FAQs.