Click here to Enlarge
Fujifilm NP-100 battery replacement

Fujifilm NP-100 Compatible with the Following Battery Code :

FUJIFILM : NP-100

GP : VFL003

HAHNEL : HL-100

HAMA : 47210

HELIOS : HS-DC101

JVC : BN-V101

POLAROID : PR-102DG

RAYOVAC : RV-DC2100

RICOH : DB-30

SONY : DFU003l01, VSN025

TOSHIBA : NP-100

Fujifilm NP-100 Fits for the Following Model :

Fujifilm :DS260, FINEPIX MX-600Z, MX-600, MX-600X, MX-700, MX600

JVC :GC-S5

Ricoh :CAPLIO RDC-I700

Samsung :DIGIMAX U-CA3

Toshiba :PDR-M3

All of us want to prolong our Fujifilm NP-100 Digital Camera battery's life. But without question every battery has a natural course of aging. After used for a long time, the battery get weak. This is cannot be eliminated, but we can prolong this aging course by using suitable method.

Store :
1): Store it in a cool and dry place (The suitable temperature is about 15°C).
2): Before storage, you should confirm your Fujifilm NP-100 is not fully depleted. If empty, charge for about 30 minutes .
3): Usually a lithium-ion battery should be stored at about 40% state-of-charge, because laptop battery's self discharge can break the battery in the storage .
4): Use soft and dry cloth to clean your NP-100 battery after using it.
5): Please take out the Fujifilm NP-100 battery from your machine when it is not being used.

Charge :
1):When you prepare to charge for your Fujifilm NP-100 battery ,make sure the temperature is around the room temperature.
2): Most battery can be fully charged in about 3 hours so do not leave a battery in a charger for a long time.
3): Do not charged to higher voltages than its threshold voltage ,as it would become unsafe. Especially need to pay attention is avoid over-charging and over-discharging.
4): Please notice this: It is not very distinct to reduce the charge time by increasing the charge current .

See more battery tips at Battery Tips and Battery FAQs.